Firmware & MCU Download(For Mercedes NTG 4.5 4.7)

Firmware Download(For Mercedes NTG 4.5 4.7)

Version number: 9.2.5
Upload Date: 2020.07.17

Download address 1

DOWNLOAD

Download address 2:

download

Upgrade steps:

After downloading, extract the file and get the file “ISPBOOOT.BIN”.

  1. Copy the “ISPBOOOT.BIN” file into the root directory of the USB flash drive.
  2. Insert the USB flash drive into the USB interface connected by the USB cable.
  3. Turn on the CarPlay system and enter the main menu, click ‘Setup–User Update–System update–Password: 4091’.
  4. Wait for about 2 minutes, the upgrade process will occur during the process, and the power cannot be cut off during the process.
  5. After the upgrade is completed, it still stops at the user upgrade interface.

NOTE:
Please format the USB flash drive as FAT32.
The USB flash drive should not exceed 32G.

MCU Download(For Mercedes NTG 4.5 4.7)

Version number: 20.4.3.11
Upload Date: 2020.07.08

Download address 1

DOWNLOAD

Download address 2:

download

Upgrade steps:

After downloading, extract the file and get the file “upgrade.bin”.

  1. Copy the “upgrade.bin” file into the root directory of the USB flash drive.
  2. Insert the USB flash drive into the USB interface connected by the USB cable.
  3. Turn on the CarPlay system and enter the main menu, click ‘Setup–User Update–MCU update–Password: 4091’.
  4. Wait for about 2 minutes, the upgrade process will occur during the process, and the power cannot be cut off during the process.
  5. After the upgrade is completed, it still stops at the user upgrade interface.

NOTE:
Please format the USB flash drive as FAT32.
The USB flash drive should not exceed 32G.

Firmware & MCU Download(For Mercedes NTG 5.0 5.1 5.5)

Firmware Download(For Mercedes NTG 5.0 5.1 5.5)

Version number: 9.2.7
Upload Date: 2020.07.17

Download address 1

DOWNLOAD

Download address 2:

download

Upgrade steps:

After downloading, extract the file and get the file “ISPBOOOT.BIN”.

  1. Copy the “ISPBOOOT.BIN” file into the root directory of the USB flash drive.
  2. Insert the USB flash drive into the USB interface connected by the USB cable.
  3. Turn on the CarPlay system and enter the main menu, click ‘Setup–User Update–System update–Password: 4091’.
  4. Wait for about 2 minutes, the upgrade process will occur during the process, and the power cannot be cut off during the process.
  5. After the upgrade is completed, it still stops at the user upgrade interface.

NOTE:
Please format the USB flash drive as FAT32.
The USB flash drive should not exceed 32G.

MCU Download(For Mercedes NTG 5.0 5.1 5.5)

Version number: 20.4.2.14
Upload Date: 2020.07.17

Download address 1

DOWNLOAD

Download address 2:

download

Upgrade steps:

After downloading, extract the file and get the file “upgrade.bin”.

  1. Copy the “upgrade.bin” file into the root directory of the USB flash drive.
  2. Insert the USB flash drive into the USB interface connected by the USB cable.
  3. Turn on the CarPlay system and enter the main menu, click ‘Setup–User Update–MCU update–Password: 4091’.
  4. Wait for about 2 minutes, the upgrade process will occur during the process, and the power cannot be cut off during the process.
  5. After the upgrade is completed, it still stops at the user upgrade interface.

NOTE:
Please format the USB flash drive as FAT32.
The USB flash drive should not exceed 32G.