Firmware Download(AUDI CarPlay MMI Universal)

Version number: 9.2.9.yl.a
Upload Date: 2020.10.21

Download address:

DOWNLOAD

Note:
This firmware is not compatible with 8.3-inch widescreen. If you have an 8.3-inch wide screen, please go to the bottom of the page for the 8.3-inch screen firmware.

Update content:

  1. Fixed the bug that the connection CarPlay is fixed to day mode when the automatic dark night mode is turned off
  2. Add Audi widescreen version
  3. Fix the Bluetooth bug:   1).Fixed that when the OEM Bluetooth phone is turned on, Android auto mirroring does not actively connect to Bluetooth, and Apple CarPlay cannot answer the phone.   2). The call button is changed to the default closed.   3). Fixed the problem that the phone buttons on the steering wheel did not work when using OEM Bluetooth phones.
  4. Bluetooth call sound mode repair: reduce the phone output volume, reduce the default main volume, increase the default MIC volume
  5. Added the function that Android auto can adjust the position up, down, left and right
  6. Multi-partition selection of U disk is added, which can be controlled by three keys

Upgrade steps:

After downloading, extract the file and get the file “ISPBOOOT.BIN”.

  1. Copy the “ISPBOOOT.BIN” file into the root directory of the USB flash drive.
  2. Insert the USB flash drive into the USB interface connected by the USB cable.
  3. Turn on the CarPlay system and enter the main menu, click ‘Setup–User Update–System update–Password: 4091’.
  4. Wait for about 2 minutes, the upgrade process will occur during the process, and the power cannot be cut off during the process.
  5. After the upgrade is completed, it still stops at the user upgrade interface.

NOTE:
Please format the USB flash drive as FAT32.
The USB flash drive should not exceed 32G.

MCU Download(AUDI CarPlay MMI Universal)

Version number: 20.05.13
Upload Date: 2020.10.28

Download address 1

DOWNLOAD

Upgrade steps:

After downloading, extract the file and get the file “upgrade.bin”.

  1. Copy the “upgrade.bin” file into the root directory of the USB flash drive.
  2. Insert the USB flash drive into the USB interface connected by the USB cable.
  3. Turn on the CarPlay system and enter the main menu, click ‘Setup–User Update–MCU update–Password: 4091’.
  4. Wait for about 2 minutes, the upgrade process will occur during the process, and the power cannot be cut off during the process.
  5. After the upgrade is completed, it still stops at the user upgrade interface.

NOTE:
Please format the USB flash drive as FAT32.
The USB flash drive should not exceed 32G.

Firmware Download for 8.3″ screen(AUDI CarPlay MMI)

This firmware is compatible with models with an original screen size of 8.3 inches.

Version number: 9.2.9.yl.aw
Upload Date: 2020.10.22

Download address 1

DOWNLOAD

Update content:

  1. Fixed the bug that the connection CarPlay is fixed to day mode when the automatic dark night mode is turned off
  2. Add Audi widescreen version
  3. Fix the Bluetooth bug:   1).Fixed that when the OEM Bluetooth phone is turned on, Android auto mirroring does not actively connect to Bluetooth, and Apple CarPlay cannot answer the phone.   2). The call button is changed to the default closed.   3). Fixed the problem that the phone buttons on the steering wheel did not work when using OEM Bluetooth phones.
  4. Bluetooth call sound mode repair: reduce the phone output volume, reduce the default main volume, increase the default MIC volume
  5. Added the function that Android auto can adjust the position up, down, left and right
  6. Multi-partition selection of U disk is added, which can be controlled by three keys

Upgrade steps:

After downloading, extract the file and get the file “ISPBOOOT.BIN”.

  1. Copy the “ISPBOOOT.BIN” file into the root directory of the USB flash drive.
  2. Insert the USB flash drive into the USB interface connected by the USB cable.
  3. Turn on the CarPlay system and enter the main menu, click ‘Setup–User Update–System update–Password: 4091’.
  4. Wait for about 2 minutes, the upgrade process will occur during the process, and the power cannot be cut off during the process.
  5. After the upgrade is completed, it still stops at the user upgrade interface.

NOTE:
Please format the USB flash drive as FAT32.
The USB flash drive should not exceed 32G.